Generalised polygons of Regions (NUTS 3) with territorial identifications and selected absolute and ratio indicators for housing stock from the 2021 Census
Datová sada s prostorovým vymezením Královéhradeckého kraje. Zdrojem dat je Odbor analýz, podpory řízení a kontroly Krajského úřadu Královéhradeckého kraje.
Datová sada s prostorovým vymezením obcí v Královéhradeckém kraji. Zdrojem dat je Odbor analýz, podpory řízení a kontroly Krajského úřadu Královéhradeckého kraje.
Datová sada s prostorovým vymezením okresů v Královéhradeckém kraji. Zdrojem dat je Odbor analýz, podpory řízení a kontroly Krajského úřadu Královéhradeckého kraje.
Datová sada s prostorovým vymezením správních obvodů obcí s pověřeným obecním úřadem v Královéhradeckém kraji. Zdrojem dat je Odbor analýz, podpory řízení a kontroly Krajského úřadu Královéhradeckého kraje.
Datová sada s prostorovým vymezením správních obvodů obcí s rozšířenou působností v Královéhradeckém kraji. Zdrojem dat je Odbor analýz, podpory řízení a kontroly Krajského úřadu Královéhradeckého kraje.
Published documents on the official notice board of the town of Humpolec
Index sociálního vyloučení je kvantitativní ukazatel míry a rozsahu sociálního vyloučení v jednotlivých obcích Česka. Po agregaci údaje z úrovni obci je možné stejným způsobem (pomocí 30bodové škály) vyhodnocovat i situaci na úrovni správních obvodů ORP a krajů.
Informace o poskytnutých finančních prostředcích
Informace z území krajů, okresů, obcí s rozšířenou působností i obcí se zaměřením zejména na hospodářské, sociální, životní prostředí, administrativní členění, veřejnou správu i samosprávu, dotace apod.
Datová sada obsahuje rovněž údaje o výši poskytnutých příspěvků, poskytnutí podpory a další podrobnosti o projektech žadatelů. Poskytovatelem dat je Karlovarská agentura rozvoje podnikání, p.o.
Dataset for the theme Addresses (AD) harmonised according to the INSPIRE Directive and ELF Data Specification version 1.0. Harmonized INSPIRE dataset contains address points and their components, which are country, municipality, municipality part, Prague district (MOP), town district (MOMČ), street and post. Data contains also 2D geometry - pointers of address. The dataset covers the whole area of Czech Republic. It is provided as Open Data (licence CC-BY 4.0). Data is based on RÚIAN (Register of territorial identification, addresses and real estates). .04%, i.e. 1060 of addresses do not contain geometry – coordinates of pointer (to 2025-12-15) and therefore are not included in the dataset. Data is created daily via individual municipalities (if any change within the municipality occurs), is provided in the GML 3.2.1 format and is valid against XML Definition Schema for the theme Addresses in version 4.0 and spatial data scheme for ELF in version 1.0. Dataset is compressed (ZIP) for downloading. More in the Act No. 111/2009 Coll., on the Basic Registers, in Decree No. 359/2011 Coll., on the Basic Register of Territorial Identification, Addresses and Real Estates in the current versions and in the INSPIRE Data Specification on Addresses v. 3.0.1 from 2010-04-26.
Dataset for the theme Administrative Units (AU) harmonised according to the INSPIRE Directive and ELF Data Specification version 1.0. Harmonized INSPIRE dataset contains only administrative units and their boundaries. Administrative units are country, regions, districts and municipalities. The dataset covers the whole territory of the Czech Republic in one file. Administrative boundaries are routed between common boundary points of three administrative units at the lowest level of division, i.e. municipalities. It is provided as Open Data (licence CC-BY 4.0). Data is based on RÚIAN (Register of territorial identification, addresses and real estates). Dataset is created daily in case of any change. Data in the GML 3.2.1 format are valid against XML Definition Schema for the theme Administrative Units in version 4.0 and spatial data scheme for ELF in version 1.0. Dataset is compressed (ZIP) for downloading. More in the Act No. 111/2009 Coll., on the Basic Registers, in Decree No. 359/2011 Coll., on the Basic Register of Territorial Identification, Addresses and Real Estates in the current versions, in the INSPIRE Data Specification on Administrative Units v 3.0.1 from 2010-04-26 and in ELF Data Specification v1.0.
Dataset for the theme Buildings (BU) harmonised according to the INSPIRE Directive and ELF Data Specification version 1.0. Data contains buildings and building parts. Building parts necessary for INSPIRE implementation are represented by entrances and come from RÚIAN. Entrances contain technical-economical attributes and other information. The data set covers the whole area of the Czech Republic. It is provided as Open Data (licence CC-BY 4.0). Data comes primarily from the project RÚIAN (Register of Territorial Identification, Addresses and Real Estates) and partly from ISKN (Information System of the Cadastre of Real Estates). .41%, i.e. 17524 of buildings do not contain centroid or polygon (to 2025-12-15) and therefore are not included in the dataset. Data is created daily via individual municipalities (if any change within the municipality occurs), provided in the GML 3.2.1 format and is valid against XML Definition Schema for the theme Buildings in version 4.0. Dataset is compressed (ZIP) for downloading. More in the Act No. 111/2009 Coll., on the Basic Registers, in Decree No. 359/2011 Coll., on the Basic Register of Territorial Identification, Addresses and Real Estates in the current versions, in the Act No. 256/2013 Coll., on Real Estate Cadastre, in Decree No. 357/2013 Coll., on Real Estate Cadastre and in the INSPIRE Data Specification on Buildings v 3.0 from 2013-12-13.
Dataset for the theme Cadastral Parcels (CP) harmonised according to the INSPIRE Directive and ELF Data Specification version 1.0. Data contains boundaries of cadastral units, parcels and parcel numbers. Dataset is provided as Open Data (licence CC-BY 4.0). Data is based on ISKN (Information System of the Cadastre of Real Estates). Data is available only in those cadastral units, where the cadastral map is in digital form - (to the 2025-12-15 it is 99.38% of the Czech territory, i.e. 78 374.20km2). Data is created daily (if any change within the cadastral unit occurs). Data in the GML 3.2.1 format is valid against XML Definition Schema for the theme Cadastral Parcels in version 4.0 and against spatial data scheme for ELF in version 1.0. Dataset is compressed (ZIP) for downloading. More in the Cadastral Act No. 256/2013 Coll., Cadastral Decree No. 357/2013 Coll., Cadastral Decree on Data Provision No. 357/2013 Coll., as amended and INSPIRE Data Specification on Cadastral Parcels v 3.0.1.
Dataset for the theme Cadastral Parcels (CP) harmonised according to the INSPIRE Directive in an extended data model (CPX). The dataset focuses on providing full content of cadastral map of the Czech Republic using extension of CP data model according to the rules of INSPIRE technical guidance. Data is extended on easements, geodetic control points, other features of digital cadastral map. Parcels contain some additional attributes in comparision with INSPIRE dataset as for instance type of boundary, mode of land use, nature of land use, link to the building on the parcel and map symbols. Data contain also original arc geometry of parcel boundaries. Dataset is provided as Open Data (licence CC-BY 4.0). Data is based on ISKN (Information System of the Cadastre of Real Estates). In the areas with analogue map (raster form) only centroids of parcels are available. Boundaries of cadastral units are available for the whole Czech Republic. Parcels, easements, geodetic control points and other features of map from the territory where the digital map occures (to the 2025-12-15 it is 99.38% of the Czech Republic, i.e. 78 374.20km2. Data is created daily (if any change within the cadastral unit occurs). Data in the GML 3.2.1 fotrmat are valid against XML Definition Schema for the Cadastral Parcels Extended in version 4.0. Dataset is compressed (ZIP) for downloading. More in the Cadastral Act No. 256/2013 Coll., Cadastral Decree No. 357/2013 Coll., Cadastral Decree on Data Provision No. 357/2013 Coll. as amended and INSPIRE Data Specification on Cadastral Parcels v 3.0.1.
For the theme Elevation INSPIRE requires data harmonisation according Elevation - Grid Coverace application schema. This dataset of the elevation of the Czech Republic therefore has the unified design with other data created for this INSPIRE theme in frame of whole Europe. Data were derived from the Digital Terrain Model of the Czech Republic – 4th generation (DMR 4G). For compliance with the data specification data were transformed to coordinate reference system ETRS89-TM33N and heigh reference system EVRS. Data are provided in graphic raster format (tiff) with 5 m spatial resolution together with the accompanying information in GML format.
The INSPIRE Elevation TIN data are harmonised according to INSPIRE Implementing Rules. This dataset of the elevation of the Czech Republic therefore has the unified design with other data created for this INSPIRE theme in frame of whole Europe. Data were derived from the Digital Terrain Model of the Czech Republic – 5th generation (DMR 5G). For compliance with the data specification data were transformed to coordinate reference system ETRS89-TM33N and heigh reference system EVRS. Data are provided in GML format, version 3.2.1. Export units are defined by tiles 2 x 2 km. The file consists mainly from coordinates of descrete points, that are supplemented by addtition information.
The INSPIRE - Geographic Names data are harmonised according to INSPIRE Implementing Rules and correspond with INSPIRE xml schema in version 4.0 and ELF xml schema in version 1.0. This dataset of geographic names of the Czech Republic therefore has the unified design with other data created for this INSPIRE theme in frame of whole Europe. The features are represented by a vector (punctual) component with attributes containing wider information about names. The base of the dataset is the database of geographic names of the Czech Republic Geonames completed with names of features located in the Fundamental Base of Geographic Data of the Czech Republic (ZABAGED®) that are not part of Geonames (street and squares names, traffic nodes and protected areas). The attributes are based on the source databases contents eventually constant on the base of characteristic of source databases (e.g. all names are Czech endonyms, names originating in Geonames standard, street names are official etc.)
The INSPIRE - Land use data from application schema Existing land use are harmonised according to INSPIRE Implementing Rules and corresponds with INSPIRE xml schema in version 4.0. The dataset is processed according to the application schema Existing Land Use. This dataset of the land use of the Czech Republic therefore has the unified design with other data created for this INSPIRE theme in frame of whole Europe. The features are represented by a vector component with attributes containing wider information about names. The base dataset is the Fundamental Base of Geographic Data of the Czech Republic (ZABAGED®).Therefore the land use dataset is based on observed reality derived from geographical data. The Hierarchical INSPIRE Land Use Classification System (HILUCS), required by Commission Regulation (EU) No 1089/2010, is used for classification of land use features.
The INSPIRE Orthoimagery data are harmonised according to INSPIRE Implementing Rules. This dataset of the Orthophoto of the Czech Republic therefore has the unified design with other data created for this INSPIRE theme in frame of whole Europe. Data were derived from the dataset of the Orthophoto of the Czech Republic. For compliance with the data specification data were transformed to coordinate reference system ETRS89-TM33N. Data are provided in graphic raster format (JPEG 2000) with 0.25 m pixel resolution. Export units are defined by the grid ETRS89-GRS80.